12V Automatic Rebar Tying Machine Rebar Tier Binding Machine Wire Knoting Cordless 2XRechargeable Lithium Battery Electric Tool
Material: Plastic + Metal
Battery: 12V Lithium Ion Batteries
Battery Capacity: 1500 mAh
Battery Charging Time: 1.5 Hours
Tying Wire Diameter: 0.8mm
Tying Wire Length: 110m / 360ft
Knot: 1000 Knots
Tying Time: 0.8s
Applicable Scope Of Steel Strapping: 8mm – 34mm
Machine Dimension: 270 x 65 x 195 mm / 10.63 x 2.56 x 7.68 inch
Adapter Input: 100-240V 50/60Hz
Adapter Plug: US Plug (we will send you the suitable adapter according to your location)
● Compact size, lightweight, easy to grab.
● Rebar tier is a hand held machine used to pack rebars quickly.
● It is a miniature motor tool has the trait of safety and credibility.
● Used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.
● Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.
Tying Wire Installations:
1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.
2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.
(Note: Clench the wire plate when tear the packaging film, do not let the wire loose. If the wire is free to disperse, it will lead to the spread of the wire stuck in the wire plate.)
3. Insert the head of the wire guide into the tap pipe until it is resisted.
4. Cover the plate and fasten the locking piece.
5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out.
6. If you want to take out the wire plate when finished, press and hold the locking piece, open the wire plate cover plate, holding the wire tray to the side and pull out.
1. The rebar tirer’s jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles.
(Note: There can be no barrier between the mouth of the jaws and the wire.)
2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off).
(Note: Press one button at a time, do not probe the jaws at work.)
3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.
4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.
1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.
2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.
1. Clean the machine regularly, keep the wire mouth clean.
2. This product can not be placed randomly, so as not to cause damage to parts.
3. Batteries must not be placed together with other metal objects to avoid short circuit.
4. Non-professional do not disassemble the machine arbitrarily, lest cause damage.
5. When you meet an unresolved failure, please give it to the professional repair.
1 x Rebar Tier
1 x Pliers
1 x Adapter
1 x Tying Wire
1 x Storage Box
1 x User Manual
2 x Lithium Ion Batteries
Any questions, please contact us for solution. Hope a nice day!
– Please allow slight dimension difference due to manual measurement.
– Please consider the actual sizes in the listing as the pictures are generally enlarged to show detail.
– There might be a little color difference due to the monitor, camera or other factors, please refer to the physical item.
– Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Yes. We provide free shipping to over 200 countries around the world. However, there are some locations we are unable to ship to. If you happen to be located in one of those countries we will contact you.
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive in your country.
Yes, you will receive an email once your order ships that contain your tracking information. If you haven’t received tracking info within 5 days, please contact us.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system. If your order was placed more than 5 business days ago and there is still no information on your tracking number, please contact us.
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Your satisfaction is our #1 priority. Therefore, you can request a refund or reshipment for ordered products if:
We do not issue the refund if:
*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.